

XPRO Interior
The XPRO Series is a professional-grade water-based acrylic interior paint designed for residential and commercial spaces where low odor and ease of application are top priorities. It provides strong adhesion, smooth coverage, and excellent hiding power, making it ideal for low-traffic or private areas.
Key Features:
-
Ultra-low odor & low VOC, ideal for sensitive environments
-
Strong adhesion with smooth, consistent coverage
-
Mildew- and moisture-resistant, suitable for humid climates
-
Proprietary zero-VOC colorants with over 2,050 NCS color options
-
Easy to apply with high hiding power
-
Available in Matte (1X only) and Eggshell finishes
Recommended For:
Living rooms, dining rooms, ceilings, bedrooms, and other interior surfaces such as drywall, masonry, plaster, wood, and metal.
Use this accordion to add info such as Materials, Sizing, Features, and Specifications.


Application Guidelines
- Surface Preparation: Substrates must be solid, smooth, clean, dry, dust-free, and free of mold. Wall moisture content should be ≤ 10%; surface pH should be less than 9.
- Tools & Roller Nap: Use quality brushes and rollers.
- Recommended roller nap:
- 10 mm (≈ 3/8") — standard use.
- 5 mm (≈ 3/16") — for finer finishes.
- 15 mm (≈ 5/8") — for rough or uneven surfaces.
- Application Conditions: Apply when temperature is between 10–32 °C (50–90 °F) and relative humidity is below 85%. Avoid painting in rain, heavy fog, or dusty conditions.
- Mixing: Stir paint thoroughly before use. Do not add water or any thinner.
- Boxing for Color Consistency: When using more than one can of the same color, combine (“box”) them. Start by using half of can #1, then pour can #2 into #1 and mix well. Repeat as needed to ensure uniform color.
- Rolling Technique: Apply paint in a “W” pattern, then cross-roll to level out. Each pass should cover an area roughly four times the roller length. Overlap each pass by about one-third of the roller width to avoid lap marks. Maintain a wet edge and lift off lightly at the end of each stroke for a uniform finish.
- Coat System: Typically, one coat of primer plus two coats of finish paint will achieve the best results. Allow at least 4 hours between coats (follow product label for recoat times).
- Touch-Ups / Additional Paint: For the final coat, avoid mixing batches on the same wall. If new paint is needed, repaint the entire wall for a consistent finish. Work smoothly and complete each wall in a single pass when possible.
- Dry & Cure Times: Surface is ready for light use after 24 hours. Washable after about 2 weeks. Full hardness and durability are reached in approximately 30 days.
- Cleanup: Clean tools and spills promptly with warm water and mild soap. When switching products or after use, wash brushes and rollers immediately. Make sure tools are free of excess water before reuse.
- Wet Areas: In bathrooms and shower rooms, use water-resistant joint compound or skim coat on the substrate to prevent moisture damage.
- Leftover Paint: Store remaining paint in a tightly sealed container with minimal air space. Label and keep in a cool, shaded location for future touch-ups. Properly sealed paint can usually be stored for 2 years or more.
[Official Announcement] Laurentide® Achieves China 3C Certification — Safety and Quality Recognized Once Again!
MAjOR Living Space Building Materials Co., Ltd. (MAjOR), the exclusive distributor of Laurentide® in China—a leading Canadian eco-friendly paint brand—announces that on July 29, Laurentide® successfully passed the China CCC on-site factory inspection.
From production processes to technical details, the entire review was conducted with full transparency. This certification is not only about product quality, but also serves as an authoritative endorsement of manufacturing capability—a comprehensive audit covering every stage of production.
We are proud to share that Laurentide®, with its outstanding environmental performance and proven safety standards, has met China’s most rigorous regulatory requirements. By achieving 3C certification, it now stands among the international brands recognized under the new compliance standards.


Laurentide® - 75 Years of Excellence, Built for Healthy Homes
The China 3C certification is a mandatory requirement for product safety and environmental compliance. Laurentide® has passed a series of rigorous tests, with key indicators such as formaldehyde, VOCs, and heavy metals all measuring well below national standards—underscoring the brand’s core commitment to “eco-safety.”
This certification is not only recognition of product excellence, but also provides Chinese consumers with the assurance of a worry-free, trusted choice.
Originating from Canada, Laurentide® has carried forward three generations of craftsmanship. Its products combine exceptional eco-friendliness, durability, and artistic color performance, and are widely used in premium residential and commercial spaces worldwide. Achieving the China 3C certification underscores Laurentide’s alignment with Chinese families in their pursuit of healthy living.
